6 Gib Stopping Mistakes to Avoid: Tips for a Flawless Finish

Though it might seems like a straightforward, uncomplicated process, GIB stopping is’t that simple. The issue is that most paint and plaster professionals just make it look easy. If you don’t take the right precautions, you can end up with a less-than-perfect finish.

The implications of a flawed plaster job can be serious and lasting. So, it’s worth addressing some common drywalling mistakes to avoid so that you can achieve a flawless finish.

• Neglecting The Right Tape

The tape you choose is crucial for a flawless finish. It would be best to select a tape that is suitable for your walls’ moisture level and adhesion requirements. If you use the wrong strip, it can peel off or disintegrate, leading to visible gaps and cracks.

• Incorrect Mixing

Mixing the cement compound correctly is vital to ensure that it spreads smoothly and evenly. The compound should have the right consistency to stick to the walls and not slide off. If it’s too thick, it can clump and make the wall uneven.

• Not Cleaning Off The Area Beforehand

Before you start GIB stopping, make sure the area is free of dirt, dust, and debris. Otherwise, it can mix with the compound. This can lead to surface bubbles, bumps, or lumps, causing problems for house painters in Wellington down the line.

• Not Sanding Between Coats

Sometimes, bumps are inevitable. Sanding between each coat removes any unevenness, creating a smooth surface. If you skip this step, you risk the same problem as with not cleaning beforehand.

• Under or Overfilling

To achieve a seamless finish, you need to apply the GIB compound in layers. If you don’t use enough layers, the wall can show imperfections like unevenness or bumps.

Conversely, if you overfill the wall, the compound can crack or become too thick, making it challenging to sand down.

• Applying Jointing Compound To The Wrong Surface

Not using a finishing compound for the topcoat and a jointing compound for the base layers can lead to peeling.

• Doing It Yourself

While it may seem like a straightforward task, it requires a lot of skill and experience. Hiring a professional plasterer ensures that you achieve the best possible finish for your walls.

Conclusion

GIB stopping errors like these can cause significant problems for your plaster repair. Luckily, avoiding them or pinpointing them early on doesn’t have to be a challenge. Remember, a little extra effort can go a long way in creating a beautiful and smooth surface for your walls.